background image

En

3

Connecting speaker cables

Speaker cables have two wires. One is for connecting 
the negative (-) terminals of the unit and the speaker, 
and the other is for the positive (+) terminals. If the wires 
are colored to prevent confusion, connect the black wire 
to the negative and the other wire to the positive 
terminals.

(Connecting front speakers)

a

Remove approximately 10 mm (3/8”) of insulation from 
the ends of the speaker cable and twist the bare wires of 
the cable firmly together.

b

Loosen the speaker terminal.

c

Insert the bare wires of the cable into the gap on the side 
(upper right or bottom left) of the terminal.

d

Tighten the terminal.

Using a banana plug

(U.S.A., Canada, Australia and General models only)

a

Tighten the speaker terminal.

b

Insert a banana plug into the end of the terminal.

(Connecting center/surround speakers)

a

Remove approximately 10 mm (3/8”) of insulation from 
the ends of the speaker cable and twist the bare wires of 
the cable firmly together.

b

Press down the tab.

c

Insert the bare wires of the cable into the hole in the 
terminal.

d

Release the tab.

1

Connect the front speakers (

1

/

2

to the FRONT (

/

/

\

) terminals.

3

Connecting speakers/subwoofer

• (U.S.A. and Canada models only)

Under its default settings, the unit is configured for 8-ohm 
speakers. When connecting 6-ohm speakers, set the unit’s 
speaker impedance to “6 

Ω

 MIN”. For details, see “Setting the 

speaker impedance” in “Owner’s Manual”.

• Use a subwoofer equipped with built-in amplifier.

• Before connecting the speakers, remove the unit’s power cable 

from the AC wall outlet and turn off the subwoofer.

• Ensure that the core wires of the speaker cable do not touch 

each other or come into contact with the unit’s metal areas. This 
may damage the unit or the speakers. If the speaker cables 
short circuit, “Check SP Wires” will appear on the front display 
when the unit is turned on.

FR

ONT

a

a

b

d

c

- (black)

+ (red)

FRO

NT

a

b

Banana plug

RO

UND

CENTER

a

a

b

c

d

+ (red)

- (black)

FRONT

SURROUND

SUBWOOFER

CENTER

SPEAKERS

1

2

3

4

5

9

The unit (rear)

HTR-3065_esg_C.fm  Page 3  Wednesday, December 21, 2011  4:01 PM

Summary of Contents for HTR-3065



















Reviews: