En
10
CONNECTIONS
Connecting speakers
Speaker layout
5.1-channel speaker layout (5 sp subwoofer)
Connecting speakers
Connect your speakers to their respective terminals on the rear panel.
•
Connect at least two speakers (front left and right).
•
If you cannot connect all five speakers, give priority to the surround speakers.
•
The surround speakers should be placed between 60 degrees and 80 degrees from the listening position.
Front speaker R
Front speaker L
Center speaker
Surround speaker L
Surround
speaker R
Subwoofer
About how to install the speakers, please refer to the instruction manual of the speaker.
CAUTION
•
Remove the AC power cord of this unit from the power outlet before connecting the speakers.
•
Generally speaker cables consist of two parallel insulated cables. One of these cables is a different
color, or has a line running along it, to indicate different polarity. Insert the different colored (or lined)
cable into the “+” (positive, red) terminal on this unit and the speakers, and the other cable into the “-”
(minus, black) terminal.
•
Be careful that the core of the speaker cable does not touch anything or come into contact with the metal
areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit, “Check
SP Wires” will appear on the front panel display when this unit is switched on.
•
Use speakers having more than 6
Ω
impedance when you use other than the speakers that are included
in the Yamaha Home Theatre Package.
•
Use a subwoofer that is active (built-in amplier) and turn it off before connecting to the unit when you
use other than the subwoofer that is included in the Yamaha Home Theatre Package.
VOLTAGE
SELECTOR
110V-
120V
220V-
240V
ANTENNA
FM
75
CENTER
FRONT
SUB
WOOFER
SURROUND
SUBWOOFER
SPEAKERS
Front speaker
Surround speaker
Center speaker
Subwoofer
R
L
R
L
