Yamaha GT 125 2017 Page 27 Owner'S Manual Download

Page: 27 / 80

Instrument an

control functions

4-8

2. The lever lock pin should release

from the lever lock pin stopper
and unlock the rear brake lever.

TIP

Use the rear brake lever lock while
seated.

WARNING

EWAN0010

Never apply the rear

rake lever lock

while the vehicle is movin

, other-

wise loss of control or an acci

ent

may result. Make sure that the vehi-
cle is stoppe

efore applyin

the

rear

rake lever lock.

EAU37473

Fuel tank cap

To remove the fuel tank cap

1. Open the seat. (See page 4-11.)
2. Turn the fuel tank cap counter-

clockwise and pull it off.

To install the fuel tank cap

1. Insert the fuel tank cap into the

tank opening and turn it clockwise
until the “

” marks on the cap

and tank are aligned.

2. Close the seat.

WARNING

EWA11092

Make sure that the fuel tank cap is
properly close

after fillin

fuel.

Leakin

fuel is a fire hazar

1. Fuel tank cap
2. Open.
3. Close.

UB21E2E0.book Page 8 Wednesday, July 19, 2017 3:56 PM

Summary of Contents for GT 125 2017

















































































Search results

Summary of Contents for GT 125 2017

Reviews:

Related manuals for GT 125 2017

Brands by name

Popular brands

Yamaha GT 125 2017, Owner'S Manual

Search results

Summary of Contents for GT 125 2017

Reviews:

Related manuals for GT 125 2017

Brands by name

Popular brands