manualshive.com logo in svg

Yamaha GRIZZLY YFM70GDHG, Owner'S Manual

The Yamaha GRIZZLY YFM70GDHG is a powerful all-terrain vehicle designed for adventure seekers. To ensure you get the most out of your experience, we offer a comprehensive Owner's Manual. Download it for free from manualshive.com and get ready to explore the great outdoors with confidence and ease.

Share
Download
background image

8-62

8

EBU26921

Tail/brake light

This model is equipped with an LED type of
tail/brake light.
If the tail/brake light does not come on, have a
Yamaha dealer check it.

EBU25652

Removing a wheel

1. Place the ATV on a level surface.
2. Loosen the wheel nuts.

3. Elevate the ATV and place a suitable stand

under the frame.

4. Remove the nuts from the wheel.
5. Remove the wheel.

EBU25702

Installing a wheel

1. Place the ATV on a level surface.
2. Install the wheel and the nuts.

TIP

The arrow mark 

 on the tire must point to-

ward the rotating direction of the wheel.

1. Headlight beam adjusting screw

(b)

(a)

1

1. Wheel nut

1

1

U2UD60E0.book  Page 62  Tuesday, April 28, 2015  11:55 AM

Summary of Contents for GRIZZLY YFM70GDHG

















































































































































































Reviews:

No comments

Related manuals for GRIZZLY YFM70GDHG

Brands by name

Popular brands

Load more brands