manualshive.com logo in svg

Yamaha GRIZZLY YFM70GDHG, Owner'S Manual

The Yamaha GRIZZLY YFM70GDHG is a powerful all-terrain vehicle designed for adventure seekers. To ensure you get the most out of your experience, we offer a comprehensive Owner's Manual. Download it for free from manualshive.com and get ready to explore the great outdoors with confidence and ease.

Share
Download
background image

8-32

8

EBU34211

To change the coolant

WARNING

EWB01891

Wait for the engine and radiator to cool before
removing the radiator cap. You could be
burned by hot fluid and steam blown out under
pressure. Always place a thick rag over the cap
when opening. Allow any remaining pressure
to escape before completely removing the cap.

 

1. Park the ATV on a level surface.
2. Remove  panels  A,  B,  C,  and  D.  (See  page

8-10.)

3. Remove the footboard by removing the bolts

and nuts.

4. Remove the radiator cap.

1. Footboard
2. Bolt and nut
3. Bolt

3

2

2

3

1

U2UD60E0.book  Page 32  Tuesday, April 28, 2015  11:55 AM

Summary of Contents for GRIZZLY YFM70GDHG

















































































































































































Reviews:

No comments

Related manuals for GRIZZLY YFM70GDHG

Brands by name

Popular brands

Load more brands