8-41
8
2. Remove the tailpipe by pulling it out of the
muffler, and then remove the gasket.
3. Tap the tailpipe lightly, and then use a wire
brush to remove any carbon deposits from
the spark arrester portion of the tailpipe and
inside of the tailpipe housing.
4. Check the gasket for damage, and replace it
if necessary.
5. Make sure the gasket is properly positioned,
then insert the tailpipe into the muffler and
align the bolt holes.
6. Install the bolts and tighten them to the spec-
ified torque.
1. Tailpipe bolt
1
1
1. Gasket
2. Spark arrester
3. Tailpipe
Tightening torque:
Tailpipe bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
3
2
1
U2UD60E0.book Page 41 Tuesday, April 28, 2015 11:55 AM
