5-4
5
EBU30511
Electric Power Steering warning light “EPS”
This warning light comes on when the key is
turned to “
” (on), and then goes off once the
engine is started. If the warning light remains on or
comes on after the engine is started, the EPS sys-
tem may not be working correctly. When this oc-
curs, have a Yamaha dealer check the EPS
system.
The electrical circuit of the warning light can be
checked by turning the key to “
” (on). If the
warning light does not come on, have a Yamaha
dealer check the electrical circuit.
TIP
If the engine is stopped using the engine stop
switch and the key is in the “
” (on) position,
the EPS warning light comes on to indicate that
the power assistance for the steering is not
functioning.
If the steering load is too heavy (i.e., excessive
steering use when the ATV is traveling at a slow
speed), the power assist is reduced to protect
the EPS motor from overheating.
EBU38100
Four-wheel drive icon “
”, differential gear
lock icon “
” and indicator light “
”
The four-wheel drive icon “
” comes on when the
drivetrain is set to “4WD” (four-wheel drive).
The differential gear lock icon “
” and the differ-
ential gear lock indicator light “
” come on
when the drivetrain is set to “4WD” with the differ-
ential gear locked.
TIP
Due to the synchronizing mechanism in the dif-
ferential gear case, the four-wheel drive icon
may not come on until the ATV starts moving.
When the On-Command differential gear lock
switch is set to “LOCK” or “4WD”, the “
” icon
and the “
” indicator light will flash until the
differential gear is completely locked or un-
locked. Turn the handlebar or start moving to
help the differential lock to engage or disen-
gage.
UBDE60E0.book Page 4 Monday, April 22, 2019 4:12 PM
