Yamaha GRIZZLY YFM700FWAD Owner'S Manual Download Page 163

Page: 163 / 182

9-60

6. Install the socket by pushing it in and turning

it clockwise.

7. Install the bulb cover.

NOTICE:

Make sure

the bulb cover is securely fitted over the
socket and seated properly.

[ECB03320]

8. Install the handlebar-mounted light cover as

shown, and then install the quick fasteners.

9. Adjust the handlebar-mounted light beam if

necessary.

EBU25553

Adjusting a headlight beam

NOTICE

ECB00691

It is advisable to have a Yamaha dealer make
this adjustment.

To raise a headlight beam, turn the headlight
beam adjusting screw in direction (a).
To lower a headlight beam, turn the adjusting
screw in direction (b).

1. Do not touch the glass part of the bulb.

1. Handlebar-mounted light cover

UBDE60E0.book Page 60 Monday, April 22, 2019 4:12 PM

Summary of Contents for GRIZZLY YFM700FWAD























































































































































































Search results

Summary of Contents for GRIZZLY YFM700FWAD

Reviews:

Related manuals for GRIZZLY YFM700FWAD

Brands by name

Popular brands

Yamaha GRIZZLY YFM700FWAD, Owner'S Manual

Search results

Summary of Contents for GRIZZLY YFM700FWAD

Reviews:

Related manuals for GRIZZLY YFM700FWAD

Brands by name

Popular brands