7-19
7
The ATV can be used to cross slow moving, shal-
low water of up to a maximum of 35 cm (14 in) in
depth. Before entering the water, choose your
path carefully. Enter where there is no sharp drop
off, and avoid rocks or other obstacles which may
be slippery or upset the ATV. Drive slowly and
carefully.
Test your brakes after leaving the water. If neces-
sary, apply them several times to let friction dry
out the linings. Do not continue to ride your ATV
without verifying that you have regained proper
braking ability.
WARNING! Wet brakes may have
reduced stopping ability, which could cause
loss of control.
[EWB02622]
After riding your ATV in water, be sure to drain the
trapped water by removing the check hose at the
bottom of the air filter case, the V-belt cooling duct
check hose and the rear storage compartment
check hose. Also, remove the V-belt case drain
plug and front storage compartment drain plug to
drain any water that may have accumulated.
NOTICE:
Undrained water can cause damage
or improper operation.
[ECB00842]
Wash the ATV in fresh water if it has been operat-
ed in salt water or muddy conditions.
U2LC61E0.book Page 19 Wednesday, February 26, 2014 3:56 PM
Summary of Contents for GRIZZLY 450 YFM450DF
Page 19: ...1 8 1 For Oceania 6 1 2 3 4 5 7 8 9 U2LC61E0 book Page 8 Wednesday February 26 2014 3 56 PM ...
Page 21: ...1 10 1 16 UNDER 1P0 F816L 00 7 6 U2LC61E0 book Page 10 Wednesday February 26 2014 3 56 PM ...
Page 70: ...7 1 7 EBU21142 RIDING YOUR ATV U2LC61E0 book Page 1 Wednesday February 26 2014 3 56 PM ...
Page 167: ...11 2 11 1 Model label U2LC61E0 book Page 2 Wednesday February 26 2014 3 56 PM ...