Yamaha GRIZZLY 450 YFM450DF, Owner'S Manual

Page: 114 / 170

8-22
8
To change the final gear oil
1. Place the ATV on a level surface.
2. Remove the engine guard and the final gear
case guard by removing the bolts.
3. Place an oil pan under the final gear case to
collect the used oil.
4. Remove the final gear oil filler bolt, the final
gear oil drain bolt and their gasket to drain the
oil from the final gear case.
5. Install the drain bolt and its new gasket, and
then tighten the bolt to the specified torque.
Tightening torque:
Final gear oil filler bolt:
22 Nm (2.2 m·kgf, 16 ft·lbf)
1. Engine guard
2. Final gear case guard
3. Bolt
2
3
3
1. Final gear oil drain bolt
2. Gasket
Tightening torque:
Final gear oil drain bolt:
22 Nm (2.2 m·kgf, 16 ft·lbf)
1
2
U2LC61E0.book Page 22 Wednesday, February 26, 2014 3:56 PM