8-17
8
TIP
If the engine was started before checking the oil
level, be sure to warm up the engine sufficiently,
and then wait at least ten minutes until the oil set-
tles for an accurate reading.
4. Remove the engine oil filler cap, and then
wipe the engine oil dipstick off with a clean
rag.
5. Insert the dipstick into the filler hole (without
screwing it in), and then remove it again to
check the oil level.
TIP
The engine oil should be between the tip of the
dipstick and the maximum level mark.
6. If the engine oil is not between the tip of the
dipstick and the maximum level mark, add
sufficient oil of the recommended type to
raise it to the correct level.
NOTICE:
Be sure
the engine oil is at the correct level, other-
wise engine damage may result.
[ECB00852]
7. Insert the dipstick into the oil filler hole, and
then tighten the engine oil filler cap.
1. Engine oil filler cap
1. Engine oil dipstick
2. Maximum level mark
3. Tip of the engine oil dipstick
U2LC61E0.book Page 17 Wednesday, February 26, 2014 3:56 PM
Summary of Contents for GRIZZLY 450 YFM450DF
Page 19: ...1 8 1 For Oceania 6 1 2 3 4 5 7 8 9 U2LC61E0 book Page 8 Wednesday February 26 2014 3 56 PM ...
Page 21: ...1 10 1 16 UNDER 1P0 F816L 00 7 6 U2LC61E0 book Page 10 Wednesday February 26 2014 3 56 PM ...
Page 70: ...7 1 7 EBU21142 RIDING YOUR ATV U2LC61E0 book Page 1 Wednesday February 26 2014 3 56 PM ...
Page 167: ...11 2 11 1 Model label U2LC61E0 book Page 2 Wednesday February 26 2014 3 56 PM ...