manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM35FGDY, Owner'S Manual

The Yamaha GRIZZLY 350 YFM35FGDY is a powerful and reliable ATV, perfect for off-road adventures. Ensure optimal performance and safety with the included Owner's Manual. Now available for free download at manualshive.com, providing easy access to the essential manual you need.

Share
Download
background image

4-10

4

Before starting the engine, check the throttle to be
sure it is operating smoothly. Make sure it returns
to the idle position as soon as the lever is released.

WARNING

EWB00250

Malfunction of the throttle could make it diffi-
cult to speed up or slow down when you need
to. This could cause an accident. Check the op-
eration of the throttle lever before you start the
engine. If the throttle does not work smoothly,
check for the cause. Correct the problem be-
fore riding the ATV or consult a Yamaha dealer.

EBU18321

Speed limiter 

Your ATV was delivered with an adjustable speed
limiter. The speed limiter keeps the throttle from
fully opening, even when the throttle lever is
pushed to the maximum.

1. Loosen the locknut.
2. To increase the maximum engine power avail-

able and the maximum speed of the ATV, turn
the adjusting screw in direction (a). To de-
crease the maximum engine power available
and the maximum speed of the ATV, turn the
adjusting screw in direction (b).

3. Tighten the locknut.

WARNING

EWB00240

Improper adjustment of the speed limiter and
throttle could cause throttle cable damage or
improper throttle operation. You could lose
control, have an accident or be injured. Do not
turn the adjusting screw out more than 12 mm
(0.47 in) or the throttle cable could be dam-
aged. Always make sure the throttle lever free
play is adjusted to 3.0–5.0 mm (0.12–0.20 in).
(See page 8-28.)

1. Locknut
2. Adjusting screw

3. No more than 12 mm (0.47 in)

U4S262E0.book  Page 10  Tuesday, June 10, 2008  11:40 AM

Summary of Contents for GRIZZLY 350 YFM35FGDY

















































































































































Reviews:

No comments

Related manuals for GRIZZLY 350 YFM35FGDY

Brands by name

Popular brands

Load more brands