manualshive.com logo in svg

Yamaha GRIZZLY 350 YFM35FGDY, Owner'S Manual

The Yamaha GRIZZLY 350 YFM35FGDY is a powerful and reliable ATV, perfect for off-road adventures. Ensure optimal performance and safety with the included Owner's Manual. Now available for free download at manualshive.com, providing easy access to the essential manual you need.

Share
Download
background image

8-23

8

6. Wash the sponge material gently but thor-

oughly in solvent.

WARNING

EWB01940

Always use parts cleaning solvent to clean the
sponge material. Never use low-flash-point
solvents or gasoline to clean the sponge mate-
rial because the engine could catch fire or ex-
plode.

7. Squeeze the excess solvent out of the sponge

material and let it dry.

NOTICE

ECB00440

Do not twist the sponge material when squeez-
ing it.

8. Check the sponge material and replace it if

damaged.

9. Apply a quality foam air filter oil to the sponge

material.

TIP

The sponge material should be wet but not drip-
ping.

10. Pull the sponge material over the air filter ele-

ment frame, and then install the lock plate.

1. Air filter element frame
2. Sponge material

3. Air filter element lock plate

U4S262E0.book  Page 23  Tuesday, June 10, 2008  11:40 AM

Summary of Contents for GRIZZLY 350 YFM35FGDY

















































































































































Reviews:

No comments

Related manuals for GRIZZLY 350 YFM35FGDY

Brands by name

Popular brands

Load more brands