Yamaha GRIZZLY 350 YFM35FGDY Owner'S Manual Download

Page: 134 / 144

10-2

Engine oil:

Type:

SAE 5W-30 or SAE 10W-30 or SAE 10W-40 or SAE
15W-40 or SAE 20W-40 or SAE 20W-50

Recommended engine oil grade:

API service SG type or higher, JASO standard MA

Engine oil quantity:

Without oil filter cartridge replacement:

2.20 L (2.33 US qt, 1.94 Imp.qt)

With oil filter cartridge replacement:

2.30 L (2.43 US qt, 2.02 Imp.qt)

Final gear oil:

Type:

Yamaha Friction Modified Shaft Drive Gear Oil

Quantity:

0.50 L (0.53 US qt, 0.44 Imp.qt)

Differential gear oil:

Type:

Yamaha Friction Modified Shaft Drive Gear Oil or SAE 80
API GL-4 Hypoid gear oil

Quantity:

0.23 L (0.24 US qt, 0.20 Imp.qt)

Air filter:

Air filter element:

Wet element

Fuel:

Recommended fuel:

Regular unleaded gasoline only

Fuel tank capacity:

13.5 L (3.57 US gal, 2.97 Imp.gal)

Fuel reserve amount:

3.3 L (0.87 US gal, 0.73 Imp.gal)

Carburetor:

Manufacturer:

MIKUNI

Type

quantity:

BSR33 x 1

Spark plug (s):

Manufacturer/model:

NGK/DR8EA

Spark plug gap:

0.6–0.7 mm (0.024–0.028 in)

Clutch:

Clutch type:

Wet, centrifugal automatic

-20

-10

50 ˚C

SAE 15W-40

SAE 20W-40

SAE 20W-50

SAE 10W-40

SAE 5W-30

SAE 10W-30

U4S262E0.book Page 2 Tuesday, June 10, 2008 11:40 AM

Summary of Contents for GRIZZLY 350 YFM35FGDY

















































































































































Search results

Summary of Contents for GRIZZLY 350 YFM35FGDY

Reviews:

Related manuals for GRIZZLY 350 YFM35FGDY

Brands by name

Popular brands

Yamaha GRIZZLY 350 YFM35FGDY, Owner'S Manual

Search results

Summary of Contents for GRIZZLY 350 YFM35FGDY

Reviews:

Related manuals for GRIZZLY 350 YFM35FGDY

Brands by name

Popular brands