Yamaha Grizzly 300, Owner'S Manual, Page: 43 / 146

6-1
OPERATION
Read the Owner’s Manual carefully before riding
the ATV. If there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
Read the Owner’s Manual carefully to become
familiar with all controls in order to help pre-
vent any loss of control, which could cause an
accident or injury.
Starting a cold engine
NOTICE
See the “Engine break-in” section on page 6-4
prior to operating the engine for the first time.
1. Turn the fuel cock to “ON”.
2. Turn the key to “1” and the engine stop switch
3. Shift the drive select lever into the neutral.
The corresponding indicator light should come
on. If the indicator light does not come on, have
a Yamaha dealer check the electrical circuit.
TIP
The engine can be started under the following con-
ditions:
The drive select lever is in the neutral .
The rear brake lever is applied with the drive se-
lect lever in any position. However, it is recom-
mended to shift into the neutral position before
starting the engine.
4. Use the starter (choke) in reference to the fig-
ure:
Position (1):
Cold engine start with ambient temperature
below 5 °C (40 °F).
Position (2):
Cold engine start with ambient temperature
between 0 °C (30 °F) and 30 °C (90 °F).
to “ ”.
WARNING
Indicates a potential hazard that could result in
serious injury or death.
6