Yamaha Grizzly 300, Owner'S Manual

Page: 38 / 146

5-2
Front brake
• Check operation. If soft or spongy, have Yamaha dealer bleed hy-
draulic system.
• Check brake pads for wear, and replace if necessary.
• Check brake fluid level in reservoir, and add recommended brake
fluid to specified level if necessary.
• Check hydraulic system for leakage. Correct if necessary.
5-3, 8-31, 8-32, 8-33, 8-34
5-3, 8-31, 8-32, 8-33, 8-34 Rear brake
• Check operation, and correct if necessary.
• Lubricate cables if necessary.
• Check lever and pedal free play, and adjust if necessary.
Throttle lever
• Make sure that operation is smooth. Lubricate cable and lever hous-
ing if necessary.
• Check lever free play, and adjust if necessary.
5-4, 8-29
Control cables • Make sure that operation is smooth. Lubricate if necessary. 8-38
Wheels and tires
• Check wheel condition, and replace if damaged.
• Check tire condition and tread depth. Replace if necessary.
• Check air pressure. Correct if necessary.
5-4, 8-49
Brake pedal
• Make sure that operation is smooth. Lubricate pedal pivoting point if
necessary.
8-39
Brake levers
• Make sure that operation is smooth. Lubricate lever pivoting points if
necessary.
8-38
Axle boot
• 8-37 Check for cracks or damage, and replace if necessary.
Chassis fasteners • Make sure that all nuts, bolts and screws are properly tightened. 5-6
Instruments, lights and
switches
• 5-6 Check operation, and correct if necessary.
E G A P E N I T U O R M E T I
• Check brake pads for wear.
5