Yamaha GRIZZLY 125 YFM125GY Owner'S Manual Download Page 54

Page: 54 / 130

7-9

WARNING

EWB01500

●

Do not touch the hot exhaust system.

●

Do not park the ATV during or after operation
in a place where others might be likely to
touch it.

●

Do not operate, idle, or park the ATV in dry
grass, dry ground cover, or combustible ma-

terials.

BE CAREFUL WHERE YOU RIDE

This ATV is designed for use on unpaved surfaces
only. Riding on paved surfaces can cause loss of

control.

WARNING

EWB01510

Always avoid paved surfaces, including side-
walks, driveways, parking lots and streets.
ATVs are designed for use on unpaved surfac-
es only. Paved surfaces may seriously affect
handling and control of the ATV, and may

cause the ATV to go out of control.

Summary of Contents for GRIZZLY 125 YFM125GY



































































































































Search results

Summary of Contents for GRIZZLY 125 YFM125GY

Reviews:

Related manuals for GRIZZLY 125 YFM125GY

Brands by name

Popular brands

Yamaha GRIZZLY 125 YFM125GY, Owner'S Manual

Search results

Summary of Contents for GRIZZLY 125 YFM125GY

Reviews:

Related manuals for GRIZZLY 125 YFM125GY

Brands by name

Popular brands