manualshive.com logo in svg

Yamaha GRIZZLY 125 YFM125GY, Owner'S Manual

Share
Download
Yamaha GRIZZLY 125 YFM125GY Owner'S Manual Download Page 25

 

4-4

 

1

2

3

4

5

6

7

8

9

10

11

 

3. Tighten the locknut.

WARNING

 

EWB00240 

 

Improper adjustment of the speed limiter and
throttle could cause throttle cable damage or
improper throttle operation. You could lose
control, have an accident or be injured. Do not
turn the adjusting screw out more than 12 mm
(0.47 in) or the throttle cable could be dam-
aged. Always make sure the throttle lever free
play is adjusted to 1.0–3.0 mm (0.04–0.12 in).

 

(See page 8-23.)

 

EBU18391

 

Front brake lever 

 

The front brake lever is located on the right handle-
bar. To apply the front brake, pull the brake lever
toward the handlebar grip.

 

EBU18401

 

Rear brake lever 

 

The rear brake lever is located on the left handle-
bar. To apply the rear brake, pull the brake lever to-
ward the handlebar grip.

 

1. Adjusting screw
2. Locknut
3.  No more than 12 mm (0.47 in)

3

1

2

(a)

(b)

 

1.  Front brake lever

1

Summary of Contents for GRIZZLY 125 YFM125GY



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands