manualshive.com logo in svg

Yamaha GP1300R WaveRunner 2003, Owner'S/Operator'S Manual, Page: 26 / 126

Share
Download
Yamaha GP1300R WaveRunner 2003 Owner'S/Operator'S Manual Download Page 26

1-21

E

EJU11810 

To get more boating 

safety information  

Be informed about boating safety. Addi-

tional publications and information can be
obtained from many organizations, including
the following. 

United States Coast Guard  

Consumer Affairs Staff (G-BC) 
Office of Boating, Public, and Consumer

Affairs 

U.S. Coast Guard Headquarters 
Washington, D.C. 20593-0001 
Boating Safety Hotline: 1-800-368-5647 

Other sources  

You can find local rules by contacting the

National Association of State Boating Law
Administrators, or your local Power Squad-
ron. 

Watercraft Education and 
Training  

The Online Boating Safety Course, avail-

able through the watercraft section of the
yamaha-motor.com website, is a free, 50
question learning course available to the
public. Upon successful completion of 80
percent or better, the user can request a
certificate of completion by mail or can
download one immediately. The Online
Boating Safety Course, provided by the
Boat/US Foundation, is approved by the
National Association of State Boating Law
Administrators (NASBLA) and recognized
by the United States Coast Guard. This
course meets the education requirement for
those states that recognize non-proctored,
NASBLA-approved courses. 

Yamaha is the watercraft industry’s lead-

ing manufacturer to build awareness and
support for boating education. In 1997,
Yamaha launched its GET W.E.T. (Water-
craft Education and Training) initiative and
has since reached out to over one million
Americans promoting the benefits of boating
education. 

The Online Boating Safety Course: 

http://www.boatus.com/onlinecourse/ 

E_F1G10.book  Page 21  Tuesday, July 12, 2005  10:26 AM

Summary of Contents for GP1300R WaveRunner 2003































































































































Reviews:

No comments