manualshive.com logo in svg

Yamaha GP1300R WaveRunner 2003, Owner'S/Operator'S Manual, Page: 123 / 126

Share
Download
Yamaha GP1300R WaveRunner 2003 Owner'S/Operator'S Manual Download Page 123

6-4

E

EJU11250 

Index 

2-stroke engine oil................................... 3-3

A

Adjusting the fuel injection system ........ 4-20
Adjusting the Yamaha Adjustable 
Sponson (YAS) ..................................... 4-22
Approval label of Emission control 
certificate................................................. 1-3

B

Battery............................................3-10, 4-5
Beaching the watercraft ........................ 3-32
Bilge ........................................................ 3-9
Bleeding the oil injection pump ............. 4-21
Boarding alone ...................................... 3-25
Boarding and starting in deep water ..... 3-25
Boarding with a passenger.................... 3-26
Bow down.............................................. 2-11
Bow up .................................................. 2-11

C

Capsized watercraft .............................. 3-27
Check engine warning indicator ............ 2-18
Checking the trolling speed................... 4-20
Cleaning and adjusting the 
spark plugs............................................ 4-14
Cleaning the jet intake and impeller ........ 5-4
Cleaning the watercraft ........................... 4-6
Connecting the jumper cables................. 5-6
Cooling water pilot outlet................2-8, 3-15
Crossing ................................................ 1-18
Cruising limitations ................................ 1-11

D

Docking the watercraft .......................... 3-32

E

Emergency procedures ........................... 5-4
Emission control information ................... 1-3
Engine break-in ..................................... 3-16
Engine compartment ............................... 3-7
Engine overheat warning indicator........ 2-19
Engine overheat warning system .......... 2-12
Engine serial number .............................. 1-2

Engine shut-off cord (lanyard) ............... 3-14
Engine shut-off switch ............................. 2-7
Engine stop switch .................................. 2-7
Enjoy your watercraft responsibly ......... 1-22
Exhaust temperature warning 
indicator................................................. 2-19
Exhaust temperature warning 
system ................................................... 2-13

F

Filling the fuel tank .................................. 3-4
Filling the oil tank .................................... 3-5
Fire extinguisher.................................... 3-11
Fishing vessel right-of-way.................... 1-19
Flushing the cooling system .................... 4-1
Front storage compartment ................... 2-20
Fuel and oil.............................................. 3-1
Fuel and oil systems ............................... 3-8
Fuel meter ............................................. 2-16
Fuel system ............................................. 4-3
Fuel tank ............................................... 4-11
Fuel tank filler cap ................................... 2-6
Fuel warning indicator ........................... 2-17

G

Gasohol ................................................... 3-3
Gasoline .................................................. 3-1
Getting to know your watercraft ............ 3-21
Give-way vessel .................................... 1-17
Glove compartment ............................... 2-21

H

Handgrip................................................ 2-11
Hazard information ................................ 1-15
Hood........................................................ 2-6
Hour meter/Voltmeter ............................ 2-17
Hull and deck .......................................... 3-7
Hull Identification Number (HIN).............. 1-2

I

Identification numbers ............................. 1-1
Important labels....................................... 1-6
Inspecting and adjusting the 
throttle cable.......................................... 4-13
Inspecting the battery ............................ 4-18
Inspecting the fuel system..................... 4-11
Inspecting the jet thrust nozzle angle .... 4-13

E_F1G10.book  Page 4  Tuesday, July 12, 2005  10:26 AM

Summary of Contents for GP1300R WaveRunner 2003































































































































Reviews:

No comments