background image

1

2

3

4

5

6

7

8

9

10

11

1-1

UTILITY

WARRANTY

Yamaha Motor Corporation, U.S.A. hereby warrants
that any new G11A Utility Vehicle Yamaha Golf Car
purchased from an authorized Yamaha dealer in the
United States, will be free from defects in material
and workmanship for the period of time stated here-
in, subject to the stated limitations.

THE PERIOD OF WARRANTY for any G11A Utility
Vehicle will be one year from date of purchase for
parts and labor.

The warranty shall cover the entire car except for
batteries, tires and rims, which are warranted by
their respective manufacturers.

DURING THE PERIOD OF WARRANTY any autho-
rized Yamaha Golf Car Dealer will, free of charge,
repair or replace, at Yamaha’s option, any part
adjudged defective by Yamaha due to faulty work-
manship or material from the factory. Parts used in
warranty repairs will be warranted for the balance of
the machine’s warranty period. All parts replaced
under warranty  become property of Yamaha Motor
Corporation, U.S.A.

GENERAL EXCLUSIONS from this warranty shall
include any failures caused by:

a.

Abnormal strain, neglect, or abuse, including
lack of proper maintenance, and use contrary
to the owner’s manual instructions.

b.

Accident or collision damage.

c.

Installation of parts or accessories that are not
original equipment.

d.

Fading, rust, or deterioration due to exposure
or ordinary wear and tear.

e.

Modification or alteration that affects the Utility
Vehicle’s condition, operation, performance, or
durability.

f.

Damage due to improper transportation.

SPECIFIC EXCLUSIONS from this warranty shall
include any parts replaced due to normal wear or
routine maintenance, including oil, air filter ele-
ments, brake shoes, spark pugs, starter and clutch
drive belts, and bed damage such as scratches,
dents, or deformation. Any charges incurred in
transporting a Utility Vehicle to and from an autho-
rized Yamaha Golf Car Dealer for service or in per-
forming field service is also excluded  from this war-
ranty.

THE CUSTOMER’S RESPONSIBILITY under this

warranty shall be to:
1.

Operate and maintain the Utility Vehicle as
specified in the appropriate Owner’s/
Operator’s  Manual;

2.

Give notice to an authorized Yamaha dealer of
any and all apparent defects within ten (10)
days after discovery, and make the machine
available at that time for inspection and repairs
by the dealer’s authorized representative.

WARRANTY TRANSFER: To transfer any remain-
ing warranty from the original purchaser to any sub-
sequent purchaser, it is imperative that the machine
be inspected and registered for warranty by an
authorized Yamaha Golf Car Dealer. In order for this
warranty to remain in effect, this inspection and reg-
istration must take place within ten (10) days after
transfer. An inspection and registration fee will be
charged for this service.

YAMAHA MOTOR CORPORATION, U.S.A. MAKES
NO OTHER WARRANTY OF ANY KIND,
EXPRESSED OR IMPLIED. ALL IMPLIED WAR-
RANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE WHICH EXCEED
THE OBLIGATIONS AND TIME LIMITS STATED IN
THIS WARRANTY ARE HEREBY DISCLAIMED
BY YAMAHA MOTOR CORPORATION, U.S.A.
AND EXCLUDED FROM THIS WARRANTY.

SOME STATES DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION MAY NOT APPLY TO
YOU. ALSO EXCLUDED FROM THIS WARRANTY
ARE ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES INCLUDING LOSS OF USE. SOME
STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUEN-
TIAL DAMAGES, SO THE ABOVE EXCLUSION
MAY NOT APPLY TO YOU.

THIS WARRANTY   GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH VARY FROM STATE TO STATE.

YAMAHA MOTOR MANUFACTURING 
CORPORATION OF AMERICA  
Newnan, Georgia 30265-1320

Effective Date: 4/1/92
LIT-13710-05-92

YAMAHA MOTOR 

CORPORATION, U.S.A.

G11A UTILITY VEHICLE

LIMITED WARRANTY

LIT_19626_11_97.qxd  3/22/01  3:23 PM  Page iv

Summary of Contents for G11A

















































Reviews: