MAINTENANCE
1
2
3
4
5
6
7
8
9
10
11
8-6
UTILITY
Engine Oil Replacement
1. Warm up the engine for several
minutes, place the utility car on a
level surface, then stop the
engine.
Use caution not to touch hot engine
oil or hot engine parts, during the
following procedure.
2. Place an oil pan under the engine
drain plug.
3. Remove the oil drain plug and let
the oil drain completely.
Dispose of used oil in an environmen-
tally safe way, such as taking oil to an
oil collection station.
4. Install the drain plug, along with a
new drain plug gasket, finger tight
before tightening to the following
torque:
Drain plug torque:
23 ft.lb
(31 Nm, 3.1 m.kg)
5. Add the correct quantity of oil
through the oil filler hole.
Recommended engine oil classifica-
tion: API Service SE, SF, or SG.
Engine oils labeled “Energy Con-serv-
ing II” are recommended.
NOTE
:
NOTE
:
WARNING
Recommended oil:
YAMALUBE 4-cycle oil or
SAE 10W-30
Engine oil capacity:
1.16 US qt
(1.1 L, 0.24 Imp gal)
Oil change quantity:
1.0 US qt
(0.9 L, 0.19 Imp gal)
Y-624
LIT_19626_11_97.qxd 3/22/01 3:24 PM Page 8-6
Summary of Contents for G11A
Page 1: ...OWNER S OPERATORS MANUAL UTILITY CAR G11A ...
Page 47: ......
