Yamaha FZS600 2000, Supplementary Service Manual

Page: 19 / 41

–11–
CABLE ROUTING
SPEC
O Use a plastic clamp to fasten to-
gether the sidestand switch lead
and the frame.
P Pass the sidestand switch lead
through the bottom of the coolant
pipe.
Q Do not loosen the fan motor lead
here.
R Pass the clutch cable and starter
cable outside of high tension
code#1.
S Use a steel holder to fasten to-
gether the speed sensor lead
and outer tube.
T Use a plastic clamp to fix the
speed sensor lead at 3 points af-
ter running the lead along the
outside of the brake hose.
First. Fasten the bottom end of
the speed sensor lead without
loosening.
Second. Fasten the lead several
times from the bottom end by
running along the brake hose.
U Pass the hom lead under the
horn bracket, then connect it at
the back of the horn.
V Pass only the starter lead
through the bottom of the joint of
wire harness.