Yamaha FZ6-NHG Owner'S Manual Download Page 32

Page: 32 / 98

INSTRUMENT AND CONTROL FUNCTIONS

3-18

or premium unleaded fuel. Use of un-
leaded fuel will extend spark plug life
and reduce maintenance costs.

EAU39451

Fuel tank breather/overflow
hose

Before operating the motorcycle:

●

Check the fuel tank breather/over-
flow hose connection.

●

Check the fuel tank breather/over-
flow hose for cracks or damage,
and replace it if damaged.

●

Make sure that the end of the fuel
tank breather/overflow hose is not
blocked, and clean it if necessary.

EAU13445

Catalytic converters

This vehicle is equipped with catalytic
converters in the exhaust system.

WARNING

EWA10862

The exhaust system is hot after op-
eration. To prevent a fire hazard or
burns:

●

Do not park the vehicle near
possible fire hazards such as
grass or other materials that
easily burn.

●

Park the vehicle in a place
where pedestrians or children
are not likely to touch the hot
exhaust system.

●

Make sure that the exhaust sys-
tem has cooled down before do-
ing any maintenance work.

●

Do not allow the engine to idle
more than a few minutes. Long
idling can cause a build-up of
heat.

1. Fuel tank breather/overflow hose

U5S5E2E0.book Page 18 Monday, August 4, 2008 2:07 PM

Summary of Contents for FZ6-NHG



































































































Search results

Summary of Contents for FZ6-NHG

Reviews:

Related manuals for FZ6-NHG

Brands by name

Popular brands

Yamaha FZ6-NHG, Owner'S Manual

Search results

Summary of Contents for FZ6-NHG

Reviews:

Related manuals for FZ6-NHG

Brands by name

Popular brands