Yamaha FZ6-NHG Owner'S Manual Download Page 79 | Manualshive

Page: 79 / 98

background image

PERIODIC MAINTENANCE AND ADJUSTMENT

6-35

6

EAU24350

Supporting the motorcycle

Since this model is not equipped with a
centerstand, follow these precautions
when removing the front and rear
wheel or performing other maintenance
requiring the motorcycle to stand up-
right. Check that the motorcycle is in a
stable and level position before starting
any maintenance. A strong wooden
box can be placed under the engine for
added stability.

To service the front wheel

1. Stabilize the rear of the motorcycle

by using a motorcycle stand or, if
an additional motorcycle stand is
not available, by placing a jack un-
der the frame in front of the rear
wheel.

2. Raise the front wheel off the

ground by using a motorcycle
stand.

To service the rear wheel

Raise the rear wheel off the ground by
using a motorcycle stand or, if a motor-
cycle stand is not available, by placing

a jack either under each side of the
frame in front of the rear wheel or under
each side of the swingarm.

EAU44790

Front wheel (FZ6-NHG)

WARNING

EWA14840

For the ABS model, have a Yamaha
dealer remove and install the wheel.

EAU24491

To remove the front wheel

WARNING

EWA10821

To avoid injury, securely support the
vehicle so there is no danger of it
falling over.

1. Loosen the front wheel axle pinch

bolt, then the wheel axle and the
brake caliper bolts.

1. Wheel axle

2. Front wheel axle pinch bolt

U5S5E2E0.book Page 35 Monday, August 4, 2008 2:07 PM

«
...
77
78
79
80
81
...
»

Summary of Contents for FZ6-NHG



































































































Reviews:

No comments

Related manuals for FZ6-NHG

Brand: Kappa Pages: 4

Brand: National Cycle Pages: 3

Brand: Yamaha Pages: 102

MD-052-2 Series

Brand: Acewell Pages: 2

Brand: rizoma Pages: 10

Brand: Zero Pages: 162

SUPERSPORT1000 2003

Brand: Ducati Pages: 328

Brand: Yamaha Pages: 108

Brand: Yamaha Pages: 114

Brand: Yamaha Pages: 168

Brand: Yamaha Pages: 497

Brand: Yamaha Pages: 704

Brand: Yamaha Pages: 84

Brand: Pagsta Pages: 47

Brand: Aosom Pages: 25

Brand: Malaguti Pages: 303

Brand: X-lite Pages: 57

QuickShifter easy

Brand: Healtech Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands