Instrument an
d
control functions
4-19
4
TIP
Make sure that the screwdriver is se-
curely positioned between its holders,
and then position the cable loops to-
ward the middle of the screwdriver be-
fore installing the passenger seat.
5. Install the passenger seat.
WARNING! Never ri
d
e with a
helmet attache
d
to the helmet
hol
d
er, since the helmet may hit
o
b
jects, causin
g
loss of control
an
d
possi
b
ly an acci
d
ent.
[EWA10162]
To release a helmet from the helmet
hol
d
in
g
ca
b
le
1. Remove the passenger seat.
2. Remove the screwdriver, then re-
move the helmet holding cable
from the helmet.
3. Store the cable under the seat by
hooking the cable loops over the
screwdriver, install the screw-
driver in its original position, and
then hook the helmet holding ca-
ble over the hook on the bottom of
the passenger seat.
4. Install the passenger seat.
EAU14465
Stora
g
e compartment
The storage compartment is located
under the passenger seat. (See page
4-17.)
When storing documents or other
items in the storage compartment, be
sure to wrap them in a plastic bag so
that they will not get wet. When wash-
ing the vehicle, be careful not to let any
water enter the storage compartment.
WARNING
EWA10962
Do not excee
d
the loa
d
limit of
1.5 k
g
(3 l
b
) for the stora
g
e com-
partment.
1. Helmet
2. Helmet holding cable
3. Screwdriver
4. Holder
1
2
3
4
1. Screwdriver
2. Helmet holding cable
3. Hook
1
2
3
1. Storage compartment
1
UBU270E0.book Page 19 Monday, November 14, 2016 8:53 AM
