Instrument an
d
control functions
4-7
4
Multi-function
d
isplay
The multi-function display is equipped
with the following:
odometer
two tripmeters
fuel reserve tripmeter
instantaneous fuel consumption
average fuel consumption
coolant temperature
air temperature
self-diagnosis mode
brightness control mode
Navi
g
atin
g
the multi-function
d
is-
play
Push the left set button to change the
display between the odometer “ODO”,
tripmeters “TRIP 1” and “TRIP 2”, in-
stantaneous fuel consumption “km/L”
or “L/100 km”, average fuel consump-
tion “AVE_ _._ km/L” or “AVE_ _._
L/100 km”, coolant temperature “_ _
°C”, and air temperature “Air_ _ °C” in
the following order:
ODO
→
TRIP 1
→
TRIP 2
→
km/L or
L/100 km
→
AVE_ _._ km/L or AVE_ _._
L/100 km
→
_ _ °C
→
Air_ _ °C
→
ODO
TIP
Push the right set button to chan-
ge the display in the reverse order.
The fuel reserve tripmeter and the
self-diagnosis mode come on au-
tomatically, while the brightness
control mode is accessed sepa-
rately.
O
d
ometer an
d
tripmeters
The odometer shows the total distance
traveled by the vehicle.
The tripmeters show the distance trav-
eled since they were last reset.
To reset a tripmeter, use the left set
button to display the tripmeter you
want to reset, and then push the right
set button for one second.
TIP
The odometer will lock at 999999.
The tripmeters will lock at 9999.9
but can be manually reset.
Fuel reserve tripmeter
When the fuel level becomes low, the
fuel level warning indicator and the last
segment of the fuel meter will start
flashing. The display will change to the
fuel reserve tripmeter “TRIP F” and
start counting the distance traveled
from that point. In this case, push the
left set button to switch the display in
the following order:
TRIP F
→
km/L or L/100 km
→
AVE_
_._ km/L or AVE_ _._ L/100 km
→
_ _
°C
→
Air_ _ °C
→
ODO
→
TRIP 1
→
TRIP 2
→
TRIP F
TIP
Push the right set button to chan-
ge the display in the reverse order.
1. Multi-function display
1
UBU270E0.book Page 7 Monday, November 14, 2016 8:53 AM
