Yamaha FZ-07 2016 Owner'S Manual Download Page 101

Page: 101 / 112

Specifications

9-3

Battery:

Model:

YTZ10S

Voltage, capacity:

12 V, 8.6 Ah (10 HR)

Hea

ht:

Bulb type:

Halogen bulb

Bul

watta

Headlight:

H4, 60.0 W/55.0 W

Brake/tail light:

LED

Front turn signal/position light:

21.0 W/5.0 W

Rear turn signal light:

21.0 W

Auxiliary light:

5.0 W

License plate light:

5.0 W

Meter lighting:

LED

Neutral indicator light:

LED

High beam indicator light:

LED

Oil pressure warning light:

LED

Turn signal indicator light:

LED

Coolant temperature warning light:

LED

Engine trouble warning light:

LED

ABS warning light:

LED (FZ07AH)

Fuse(s):

Main fuse:

30.0 A

Auxiliary fuse:

2.0 A

Headlight fuse:

15.0 A

Signaling system fuse:

10.0 A

Ignition fuse:

10.0 A

Parking lighting fuse:

10.0 A

Radiator fan motor fuse:

10.0 A

ABS control unit fuse:

7.5 A (FZ07AH)

ABS motor fuse:

30.0 A (FZ07AH)

ABS solenoid fuse:

20.0 A (FZ07AH)

Backup fuse:

7.5 A

Backup fuse 2:

10.0 A

UBU270E0.book Page 3 Monday, November 14, 2016 8:53 AM

Summary of Contents for FZ-07 2016

















































































































Search results

Summary of Contents for FZ-07 2016

Reviews:

Yamaha FZ-07 2016, Owner'S Manual, Page: 101 / 112

Search results

Summary of Contents for FZ-07 2016

Reviews: