INSTRUMENT AND CONTROL FUNCTIONS
4-29
4
With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is set to “
3. Turn the key on.
4. Shift the transmission into the neutral position.
5. Keep the front or rear brake applied.
6. Push the start switch.
Does the engine start?
With the engine still running:
7. Move the sidestand up.
8. Keep the front or rear brake applied.
9. Shift the transmission into gear.
10. Move the sidestand down.
Does the engine stall?
After the engine has stalled:
11. Move the sidestand up.
12. Release the brake.
13. Push the start switch.
Does the engine start?
The system is OK.
The vehicle can be ridden.
NO
YES
YES
NO
YES
NO
The neutral, the brake switch or the YCC-S
system may not be working correctly.
The vehicle should not be ridden
until
checked by a Yamaha dealer.
A brake switch may not be working correctly.
The vehicle should not be ridden
until
checked by a Yamaha dealer.
The sidestand switch may not be working correctly.
The vehicle should not be ridden
until
checked by a Yamaha dealer.
•
The vehicle must be placed on the center-
stand during this inspection.
•
If a malfunction is noted, have a Yamaha
dealer check the system before riding.
WARNING
”.
U2D213E0.book Page 29 Friday, September 26, 2008 3:12 PM
