Yamaha FJR13AEY Owner'S Manual Download

Page: 19 / 112

INSTRUMENT AND CONTROL FUNCTIONS

4-2

EAU10661

OFF

All electrical systems are off. The key
can be removed.

WARNING

EWA10061

Never turn the key to “OFF” or
“LOCK” while the vehicle is moving.
Otherwise the electrical systems will
be switched off, which may result in
loss of control or an accident.

EAU10691

LOCK

The steering is locked, and all electrical
systems are off. The key can be re-
moved.

To lock the steering

1. Turn the handlebars all the way to

the left or right.

2. Push the key in from the “OFF” po-

sition, and then turn it to “LOCK”
while still pushing it.

3. Remove the key.

To unlock the steering

Push the key into the main switch, and
then turn it to “OFF” while still pushing
it.

1. Push.
2. Turn.

U2D213E0.book Page 2 Friday, September 26, 2008 3:12 PM

Summary of Contents for FJR13AEY

















































































































Search results

Summary of Contents for FJR13AEY

Reviews:

Related manuals for FJR13AEY

Brands by name

Popular brands

Yamaha FJR13AEY, Owner'S Manual

Search results

Summary of Contents for FJR13AEY

Reviews:

Related manuals for FJR13AEY

Brands by name

Popular brands