Yamaha FJR1300AT Owner'S Manual Download | Manualshive

Page: 9 / 100

background image

1-1

1

SAFETY INFORMATION

EAU10250

MOTORCYCLES ARE SINGLE
TRACK VEHICLES. THEIR SAFE
USE AND OPERATION ARE DEPEN-
DENT UPON THE USE OF PROPER
RIDING TECHNIQUES AS WELL AS
THE EXPERTISE OF THE OPERA-
TOR. EVERY OPERATOR SHOULD
KNOW THE FOLLOWING REQUIRE-
MENTS BEFORE RIDING THIS
MOTORCYCLE.
HE OR SHE SHOULD:

●

OBTAIN THOROUGH INSTRUC-
TIONS FROM A COMPETENT
SOURCE ON ALL ASPECTS OF
MOTORCYCLE OPERATION.

●

OBSERVE THE WARNINGS
AND MAINTENANCE REQUIRE-
MENTS IN THE OWNER’S MAN-
UAL.

●

OBTAIN QUALIFIED TRAINING
IN SAFE AND PROPER RIDING
TECHNIQUES.

●

OBTAIN PROFESSIONAL TECH-
NICAL SERVICE AS INDICATED
BY THE OWNER’S MANUAL

AND/OR WHEN MADE NECES-
SARY BY MECHANICAL CONDI-
TIONS.

Safe riding

●

Always make pre-operation
checks. Careful checks may help
prevent an accident.

●

This motorcycle is designed to
carry the operator and a passen-
ger.

●

The failure of motorists to detect
and recognize motorcycles in traf-
fic is the predominating cause of
automobile/motorcycle accidents.
Many accidents have been
caused by an automobile driver
who did not see the motorcycle.
Making yourself conspicuous ap-
pears to be very effective in reduc-
ing the chance of this type of
accident.

Therefore:

• Wear a brightly colored jacket.
• Use extra caution when ap-

proaching and passing through
intersections, since intersec-

tions are the most likely places
for motorcycle accidents to oc-
cur.

• Ride where other motorists can

see you. Avoid riding in another
motorist’s blind spot.

●

Many motorcycle accidents in-
volve inexperienced operators. In
fact, many operators who have
been involved in accidents do not
even have a current motorcycle li-
cense.

• Make sure that you are qualified

and that you only lend your
motorcycle to other qualified op-
erators.

• Know your skills and limits.

Staying within your limits may
help you to avoid an accident.

• We recommend that you prac-

tice riding your motorcycle
where there is no traffic until you
have become thoroughly famil-
iar with the motorcycle and all of
its controls.

●

Many motorcycle accidents have
been caused by error of the motor-
cycle operator. A typical error
made by the operator is veering

U5JW12E0.book Page 1 Wednesday, April 28, 2004 10:24 AM

«
...
7
8
9
10
11
...
»

Summary of Contents for FJR1300AT





































































































Reviews:

No comments

Related manuals for FJR1300AT

Brand: Yamaha Pages: 650

Easyrack 6622520 01 01

Brand: hepco & becker Pages: 4

Brand: GAS GAS Pages: 34

Brand: R&G Pages: 6

MD-052-2 Series

Brand: Acewell Pages: 2

Brand: Cobra Pages: 38

Brand: Suzuki Pages: 440

Brand: R&G Pages: 6

Brand: R&G Pages: 26

Brand: PUIG Pages: 2

HPS.08.473.10000/B

Brand: SW-Motech Pages: 4

Brand: X-lite Pages: 96

Brand: yasuni Pages: 9

Brand: DYNATEK Pages: 8

Brand: Shark Pages: 18

Brand: Shad Pages: 2

Brand: Shad Pages: 2

TOPMASTER V0NR55ST

Brand: Shad Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands