Yamaha FJR1300AS(X), Service Manual

Page: 647 / 754

ABS (ANTI-LOCK BRAKE SYSTEM)
8-170
Fault code No. AbS_42 Symptom Rear wheel will not recover from the locking ten-
dency even though the signal is continuously
transmitted from the ABS ECU to release the hy-
draulic pressure.
Order Item/components and probable
cause
Check or maintenance job Reinstatement
confirmation
method
1 Rotation of wheel • Check that there is no brake
disc drag on the rear wheel and
make sure that it rotates
smoothly.
• Check for brake disc distortion.
Refer to “CHECKING THE
REAR BRAKE DISC” on page
4-50.
Perform hy-
draulic unit op-
eration test 1
and check that
the operation of
the hydraulic
unit is normal.
2 Brake master cylinder and brake cali-
per • Check that the brake fluid pres-
sure is correctly transmitted to
the brake caliper when the
brake pedal is operated and
that the pressure decreases
when the pedal is released.
3 Brake fluid • Visually check the brake fluid in
the brake fluid reservoir for wa-
ter, foreign materials, solidifica-
tion, and contamination.
• Check for air in the brake lines.
4 Brake lines • Check the brake lines for kinks
and deterioration (particularly
between the hydraulic unit and
the rear brake caliper).
WARNING
EWA3P6D005
Only use genuine Yamaha
parts. Using other brake pipes,
hoses and union bolts may
close the brake lines.
• Check that the connections of
the brake lines from the brake
master cylinder to the hydraulic
unit and from the hydraulic unit
to the proportioning valve are
correct.
See WARNING and NOTE.
1
2
3 4