Yamaha FJR1300AS(X), Service Manual

Page: 526 / 754

SIGNALING SYSTEM
8-49
NG
→
OK
↓
NG
→
OK
↓
The turn signal light, turn signal indicator light or both fail to blink.
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
NG
→
OK
↓
5. Check the diode 2. (FJR1300AS
only)
Refer to “CHECKING THE DIODE
(FJR1300AS only)” on page 8-257.
Replace the diode.
6. Check the entire signaling system
wiring.
Refer to “CIRCUIT DIAGRAM (1/2)
(FJR1300A)” on page 8-39, “CIR-
CUIT DIAGRAM (2/2) (FJR1300A)”
on page 8-41, “CIRCUIT DIAGRAM
(1/2) (FJR1300AS)” on page 8-43,
and “CIRCUIT DIAGRAM (2/2)
(FJR1300AS)” on page 8-45.
Properly connect or repair the signaling
system wiring.
This circuit is OK.
1. Check the turn signal light bulbs
and sockets.
Refer to “CHECKING THE BULBS
AND BULB SOCKETS” on page
8-238.
Replace the turn signal light bulb, socket or
both.
2. Check the turn signal switch.
Refer to “CHECKING THE
SWITCHES” on page 8-233. Replace the left handlebar switch.
3. Check the hazard switch.
Refer to “CHECKING THE
SWITCHES” on page 8-233. Replace the right handlebar switch.
4. Check the turn signal/hazard relay.
Refer to “CHECKING THE TURN
SIGNAL/HAZARD RELAY” on page
8-245.
Replace the turn signal/hazard relay.