INSTRUMENT AND CONTROL FUNCTIONS
3-5
3
EAU11060
Neutral indicator light “
”
This indicator light comes on when the
transmission is in the neutral position.
EAU11080
High beam indicator light “
”
This indicator light comes on when the
high beam of the headlight is switched
on.
EAU11123
Oil level warning light “
”
This warning light comes on if the en-
gine oil level is low.
The electrical circuit of the warning light
can be checked by turning the key to
“ON”. The warning light should come
on for a few seconds, and then go off.
If the warning light does not come on
initially when the key is turned to “ON”,
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
TIP
Even if the oil level is sufficient, the
warning light may flicker when riding on
a slope or during sudden acceleration
or deceleration, but this is not a mal-
function.
EAU40518
Engine trouble “
”/YCC-S
“SHIFT” indicators and warning
light
Engine trouble indicator “
” and
warning light
This indicator is displayed and the
warning light comes on or flashes if a
problem is detected in the electrical cir-
cuit monitoring the engine. If this oc-
curs, have a Yamaha dealer check the
self-diagnosis system. (See page 3-13
for an explanation of the self-diagnosis
device.)
YCC-S indicator “SHIFT” and warning
light
This indicator is displayed and the
warning light comes on if there is a mal-
function in the YCC-S. If this occurs:
●
The YCC-S is disabled, so it will be
impossible to shift out of the gear
you are in.
●
The clutch may stay engaged, so a
shuddering sensation may be felt
as you come to a stop.
1. Engine trouble indicator “
” and warning
light
1. YCC-S indicator “SHIFT” and warning light
U1DAE1E0.book Page 5 Tuesday, August 24, 2010 5:28 PM
