INSTRUMENT AND CONTROL FUNCTIONS
3-17
3
and release this switch after start-
ing the engine to enable hand
shifting.
EAU40494
Shift pedal
This motorcycle is equipped with a con-
stant-mesh 5-speed transmission. The
shift pedal is located on the left side of
the motorcycle. Neutral is at the bottom
position.
TIP
It is impossible to shift gears unless the
key is in the “ON” position.
The shift pedal can be adjusted to three
positions to suit the rider’s preference.
To adjust the shift pedal position
1. Remove the shift pedal by remov-
ing the bolt.
2. Move the shift pedal to the desired
position.
3. Install the bolt, and then tighten it
to the specified torque.
1. Shift pedal
1. Shift pedal
2. Bolt
3. Standard position
Tightening torque:
Shift pedal bolt:
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
3
1
2
U1DAE1E0.book Page 17 Tuesday, August 24, 2010 5:28 PM
