Yamaha FJR 2007 Owner'S Manual Download Page 81

Page: 81 / 112

PERIODIC MAINTENANCE AND MINOR REPAIR

6-26

EAU23153

Checking and lubricating the
brake lever

The operation of the brake lever should
be checked before each ride, and the
lever pivots should be lubricated if nec-
essary.

EAU23211

Checking and lubricating the
centerstand and sidestand

The operation of the centerstand and
sidestand should be checked before
each ride, and the pivots and metal-to-
metal contact surfaces should be lubri-
cated if necessary.

WARNING

EWA10740

If the centerstand or sidestand does
not move up and down smoothly,
have a Yamaha dealer check or re-
pair it.

Recommended lubricant:

Lithium-soap-based grease (all-pur-
pose grease)

Recommended lubricant:

Silicone grease

Recommended lubricant:

Lithium-soap-based grease (all-pur-
pose grease)

U2D211E0.book Page 26 Friday, January 5, 2007 3:56 PM

Summary of Contents for FJR 2007

















































































































Search results

Summary of Contents for FJR 2007

Reviews:

Related manuals for FJR 2007

Brands by name

Popular brands

Yamaha FJR 2007, Owner'S Manual

Search results

Summary of Contents for FJR 2007

Reviews:

Related manuals for FJR 2007

Brands by name

Popular brands