Yamaha FJR 2007, Owner'S Manual

Page: 26 / 112

INSTRUMENT AND CONTROL FUNCTIONS
3-8
3
Ambient temperature, instanta-
neous fuel consumption and aver-
age fuel consumption modes
Push the “RESET” button to switch the
display between the ambient tempera-
ture mode “Air”, the instantaneous fuel
consumption mode “MPG” and the av-
erage fuel consumption mode “AV_ _._
MPG” in the following order:
Air
→
MPG
→
AV_ _._ MPG
→
Air
Ambient temperature mode
This display shows the ambient tem-
perature from 16 °F to 122 °F in 1 °F in-
crements. The temperature displayed
may vary from the ambient tempera-
ture.
NOTE:
●
If the ambient temperature falls be-
low 16 °F, a lower temperature
than 16 °F will not be displayed.
●
If the ambient temperature climbs
above 122 °F, a higher tempera-
ture than 122 °F will not be dis-
played.
●
The accuracy of the temperature
reading may be affected when
riding slowly [approximately under
20 km/h (12.5 mi/h)] or when
stopped at traffic signals, railroad
crossings, etc.
Instantaneous fuel consumption mode
This display shows the distance that
can be traveled on 1.0 US.gal of fuel
under the current riding conditions.
NOTE:
If traveling at speeds under 10 km/h
(6.0 mi/h), “_ _._” will be displayed.
1. Ambient temperature/instantaneous fuel
consumption/average fuel consumption
2. “SELECT” button
3. “RESET” button
1. Ambient temperature
1. Instantaneous fuel consumption
U2D211E0.book Page 8 Friday, January 5, 2007 3:56 PM