Yamaha FJR 2005 Owner'S Manual Download Page 86

Page: 86 / 102

PERIODIC MAINTENANCE AND MINOR REPAIR

6-33

EAU24310

Replacing the license plate
light bulb

1. Remove the license plate light unit

by removing the screws.

2. Remove the socket (together with

the bulb) by pulling it out.

3. Remove the defective bulb by pull-

ing it out.

4. Insert a new bulb into the socket.
5. Install the socket (together with the

bulb) by pushing it in.

6. Install the license plate light unit by

installing the screws.

EAU27011

Replacing an auxiliary light
bulb

This model is equipped with two auxil-
iary lights. If an auxiliary light bulb burns
out, replace it as follows.

1. Remove panel D (if replacing the

left auxiliary light bulb) or panel C
(if replacing the right auxiliary light
bulb). (See page 6-5.)

2. Remove the auxiliary light socket

(together with the bulb) by turning
the socket counterclockwise.

3. Remove the defective bulb by pull-

ing it out.

1. Screw

2. License plate light unit

1. License plate light bulb

1. Auxiliary light bulb socket

U3P620E0.book Page 33 Tuesday, January 24, 2006 10:47 AM

ProCarManuals.com

Summary of Contents for FJR 2005







































































































Search results

Summary of Contents for FJR 2005

Reviews:

Related manuals for FJR 2005

Brands by name

Popular brands

Yamaha FJR 2005, Owner'S Manual

Search results

Summary of Contents for FJR 2005

Reviews:

Related manuals for FJR 2005

Brands by name

Popular brands