Yamaha FJR 2005 Owner'S Manual Download Page 78

Page: 78 / 102

PERIODIC MAINTENANCE AND MINOR REPAIR

6-25

EAU23211

Checking and lubricating the
centerstand and sidestand

The operation of the centerstand and
sidestand should be checked before
each ride, and the pivots and metal-to-
metal contact surfaces should be lubri-
cated if necessary.

WARNING

EWA10740

If the centerstand or sidestand does
not move up and down smoothly,
have a Yamaha dealer check or re-
pair it.

EAUM1650

Lubricating the swingarm
pivots

The swingarm pivots must be lubricat-
ed at the intervals specified in the peri-
odic maintenance and lubrication chart.

Recommended lubricant:

Lithium-soap-based grease (all-pur-
pose grease)

Recommended lubricant:

Lithium-soap-based grease (all-pur-
pose grease)

Recommended lubricant:

Lithium-soap-based grease

U3P620E0.book Page 25 Tuesday, January 24, 2006 10:47 AM

ProCarManuals.com

Summary of Contents for FJR 2005







































































































Search results

Summary of Contents for FJR 2005

Reviews:

Related manuals for FJR 2005

Brands by name

Popular brands

Yamaha FJR 2005, Owner'S Manual

Search results

Summary of Contents for FJR 2005

Reviews:

Related manuals for FJR 2005

Brands by name

Popular brands