Operation
31
NOTE:
●
It is not necessary to use the choke when
starting a warm engine.
●
If the choke knob is left in the “
”
(start) position while the engine is running,
the engine will run poorly or stall.
5.
Pull the manual starter handle slowly un-
til you feel resistance. Then give a
strong pull straight out to crank and start
the engine. Repeat if necessary.
6.
After the engine starts, slowly return the
manual starter handle to its original po-
sition before releasing it.
7.
Slowly return the throttle grip to the fully
closed position.
NOTE:
●
When the engine is cold, it needs to be
warmed up. For further information, see
page 35.
●
If the engine does not start on the first try,
repeat the procedure. If the engine fails to
start after 4 or 5 tries, open the throttle a
small amount (between 1/8 and 1/4) and
try again. Also if the engine is warm and
fails to start, open the throttle a same
amount and try to start the engine again. If
the engine still fails to start, see page 74.
EMU27562
Electric start models
1.
Place the gear shift lever in neutral.
ZMU02355
ZMU02029
ZMU02030
ZMU01988
N
Summary of Contents for F9.92
