Instruments and indicators
30
EMU36190
Start-up checks
Place the remote control lever / gear shift le-
ver in neutral and turn the main switch to “
”
(on). After all the displays come on and the to-
tal hour display comes on, the gauge will
change to normal operation. If the buzzer
sounds and the water separator-alert indica-
tor blinks, consult your Yamaha dealer imme-
diately.
TIP:
To stop the buzzer, press the “
” (set) or
“
” (mode) button.
EMU36130
Low oil pressure-alert
If the engine oil pressure drops too low, the
low oil pressure-alert indicator will start to
blink, and the engine speed will automatically
decrease to about 2000 r/min.
Stop the engine immediately if the buzzer
sounds and the low oil pressure-alert indicator
blinks. Check the engine oil quantity and re-
plenish oil if necessary. If the alert device has
activated while the appropriate engine oil
quantity is maintained, consult your Yamaha
dealer.
NOTICE
ECM01601
Do not continue to run the engine if the
low oil pressure alert device has activated.
Serious engine damage will occur.
EMU36221
Overheat alert
If the engine temperature rises too high while
cruising, the overheat-alert indicator will start
to blink. The engine speed will automatically
decrease to about 2000 r/min.
1. Tachometer
2. Trim meter
3. Multifunction display
4. Cooling water pressure
5. Cooling water/engine temperature
6. Water detection-alert indicator
7. Battery voltage
8. Oil pressure (4-stroke models)
2
3
1
4
5
6
7
8
ZMU05416
ZMU05430
ZMU05421
U6D625E0.book Page 30 Thursday, March 13, 2008 9:06 AM
