manualshive.com logo in svg

Yamaha F70AET, Rigging Manual

Share
Download
Yamaha F70AET Rigging Manual Download Page 12

1-4

UNCRATING PROCEDURE 
(FOR TYPICAL STEEL FRAME)

7. Remove the top cowling (6).

8. If the lifting points are covered by the fly-

wheel cover, remove it.

9. Attach a lifting harness (7) securely to the

lifting points (8), and tighten the harness.

For 4-stroke V8, V6 (4.2L) and L4 (2.8L,
1.8L) engines,

 install the lifting attachment

(A) to the flywheel using the exclusive 3
bolts (B), insert the eye bolt (C) to the
attachment, attach a lifting harness (D) to
the eye bolt, and tension the harness.

* Special service tool for 4-stroke V8, V6 (4.2L)

and L4 (2.8L) engines: Lifting eye kit (P/N:
90890-06820)

Lifting eye kit contents:

To be continued.

(6)

(7)

(8)

(7)

(8)

M10 bolt (B) torque:

36 Nm, 3.6 kgf•m, 27 ft•lb

(A)

(A)

(D)

(D)

(B)

(B)

(C)

(C)

Eye bolt (C)

Eye bolt (C)

Attachment (A)

Attachment (A)

Eye bolt (C)

M10 bolt (B) 

M10 bolt (B) 
90890-06821 (3 pcs)

90890-06821 (3 pcs)

M10 bolt (B) 
90890-06821 (3 pcs)

Attachment (A)

Summary of Contents for F70AET










































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands