Maintenance
102
7. Put a new gasket on the oil level plug.
When the oil begins to flow out of the oil
level plug hole, insert and tighten the oil
level plug.
8. Put a new gasket on the gear oil drain
screw. Insert and tighten the gear oil
drain screw.
9. Securely install the cooling water inlet
covers on both sides of the gear case
using the bolt and nut removed earlier.
EMU29317
Inspecting and replacing anode(s)
Yamaha outboard motors are protected from
corrosion by sacrificial anodes. Inspect the
external anodes periodically. Remove scales
from the surfaces of the anodes. Consult a
Yamaha dealer for replacement of external
anodes.
NOTICE
ECM00721
Do not paint anodes, as this would render
them ineffective.
Recommended gear oil:
YAMALUBE outboard gear oil or Hyp-
oid gear oil
Recommended gear oil grade:
SAE 80W API GL-5 / SAE 90 API GL-5
Gear oil quantity:
F350AET 1.520 L (1.607 US qt, 1.338
Imp.qt)
F350AET2 1.520 L (1.607 US qt, 1.338
Imp.qt)
FL350AET 1.310 L (1.385 US qt, 1.153
Imp.qt)
FL350AET2 1.310 L (1.385 US qt,
1.153 Imp.qt)
Tightening torque:
9 Nm (0.92 kgf-m, 6.6 ft-lb)
Tightening torque:
9 Nm (0.92 kgf-m, 6.6 ft-lb)
ZMU05871
Tightening torque:
2.0 Nm (0.20 kgf-m, 1.5 ft-lb)
ZMU05872
6AW-9-7A-1E0.book 102 ページ ２０１３年１１月２６日 火曜日 午後７時３６分
