Operation
52
EMU36532
Checks after engine warm up
EMU36542
Shifting
While the boat is tightly moored, and without
applying throttle, confirm that the engine
shifts smoothly into forward and reverse, and
back to neutral.
EMU36981
Stop switches
Turn the main switch to “
”, or press the
engine stop button and make sure the en-
gine stops.
Confirm that removing the clip from the en-
gine shut-off switch stops the engine.
Confirm that the engine cannot be started
with the clip removed from the engine
shut-off switch.
EMU34563
Shifting
EWM00181
Before shifting, make sure there are no
swimmers or obstacles in the water near
you.
ECM01611
Warm up the engine before shifting into
gear. Until the engine is warm, the idle
speed may be higher than normal. High
idle speed can prevent you from shifting
back to neutral. If this occurs, stop the
engine, shift to neutral, then restart the
engine and allow it to warm up.
To shift out of neutral
(1) Pull the neutral interlock trigger up (if
equipped).
(2) Move the remote control lever / gear
shift lever firmly and crisply forward (for
forward gear) or backward (for reverse
gear) [about 35
(a detent can felt) for re-
mote control models]. Be sure to check
that the tilt lock lever is in the lock/down
position (if equipped) before operating in
reverse.
1. Neutral interlock trigger
1
ZMU01727
ZMU08809
F
N
R
32˚
32˚
ZMU05460
6FM-28199-75-1E0.book 52 ページ ２０１９年１０月３０日 水曜日 午前１１時２３分
