Yamaha F200C, Service Manual, Page: 235 / 323

69J1D11
7-14
1
2
3
4
5
6
7
8
9
2. Install the oil strainer
4
and bolts, and
then tighten the bolts to the specified
torque.
3. Install the oil pan
5
, and then tighten the
bolts finger tight.
4. Install the exhaust manifold
6
and bolts,
and then tighten the bolts finger tight.
5. Tighten the exhaust manifold bolts
7
,
then the oil pan bolts
8
, and then tighten
them to the specified torques.
6. Install the plate
9
.
7. Install the cooling water pipe
0
into the
muffler
A
.
8. Install the muffler
A
and bolts into the oil
pan, and then tighten the bolts to the
specified torque.
9. Install the muffler assembly
B
by insert-
ing the tip of the cooling water pipe
C
into the joint hole
a
of the upper case.
10. Install muffler assembly bolts
D
and
E
,
and pressure control valve
F
, and then
tighten them to the specified torques.
T
R
.
.
Oil strainer bolt:
10 N·m (1.0 kgf·m, 7.2 ft·lb)
T
R
.
.
Exhaust manifold bolt
7
:
20 N·m (2.0 kgf·m, 14 ft·lb)
Oil pan bolt
8
:
20 N·m (2.0 kgf·m, 14 ft·lb)
T
R
.
.
Muffler bolt:
20 N·m (2.0 kgf·m, 14 ft·lb)
Upper case, steering arm, swivel bracket and clamp brackets