Operation
52
3. Push the tilt support knob into the clamp
bracket to support the engine.
WARN-
ING! After tilting the outboard motor,
be sure to support it with the tilt sup-
port knob or tilt support lever. Other-
wise the outboard motor could fall
back down suddenly if oil in the pow-
er trim and tilt unit or in the power tilt
unit loses pressure.
[EWM00263]
NOTICE:
Do not use the tilt support lever or
knob when trailering the boat. The
outboard motor could shake loose
from the tilt support and fall. If the
motor cannot be trailered in the nor-
mal running position, use an addi-
tional support device to secure it in
the tilt position. For more detailed in-
formation, see page 56.
[ECM01642]
EMU30193
Procedure for tilting down (manual
tilt models)
1. Place the tilt lock lever in the lock posi-
tion.
2. Slightly tilt the engine up until the tilt sup-
port bar is automatically released.
3. Slowly tilt the engine down.
EMU44601
Procedure for tilting down (power
trim and tilt models)
1. Push the power trim and tilt switch “
”
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support knob
becomes free.
2. Pull out the tilt support knob.
UP
ZMU06537
ZMU06543
ZMU02306
6BP-9-76-1E0.book 52 ページ ２０１３年１１月１３日 水曜日 午後６時１１分
