Operation
51
2. Disconnect the fuel line from the out-
board motor.
3. Place the tilt lock lever (if equipped) in
the release/up position.
4. Pull up the shallow water lever (if
equipped).
5. Hold the rear of the top cowling with one
hand and tilt the engine up fully.
6. Push the tilt support knob into the clamp
bracket. Or the tilt support bar will turn to
the lock position automatically.
NOTICE:
Do not use the tilt support
lever or knob when trailering the
boat. The outboard motor could
shake loose from the tilt support and
fall. If the motor cannot be trailered in
the normal running position, use an
additional support device to secure it
in the tilt position. For more detailed
information, see page 56.
[ECM01642]
EMU44660
Procedure for tilting up (power trim
and tilt models)
1. Place the remote control lever in neutral.
2. Press the power trim and tilt switch “
”
(up) until the outboard motor has tilted
up completely.
N
ZMU06521
ZMU06533
ZMU06539
ZMU06540
N
ZMU03196
6BP-9-76-1E0.book 51 ページ ２０１３年１１月１３日 水曜日 午後６時１１分
