Maintenance
79
EMU42632
Removing propeller
1.
Straighten the cotter pin and pull it out
using a pair of pliers.
2.
Remove the propeller nut, washer, and
spacer.
WARNING! Do not use your
hand to hold the propeller when loos-
ening the propeller nut.
[EWM01891]
3.
Remove the propeller, spacer (if
equipped), and thrust washer.
EMU41981
Installing propeller
WARNING
EWM00771
On counter rotation models, be sure to
use a propeller intended for counterclock-
wise rotation. These propellers are identi-
fied with the letter “L” after the size
indication on the propeller. Otherwise the
boat could move in the opposite direction
from that expected.
NOTICE
ECM00502
Make sure to use a new cotter pin and
bend the ends over securely. Otherwise,
the propeller could come off during oper-
ation and be lost.
1.
Apply Yamalube Marine Grease to the
propeller shaft.
2.
Install the thrust washer and propeller on
the propeller shaft.
NOTICE:
Make sure
to install the thrust washer before in-
1. Propeller shaft
1. Cotter pin
2. Propeller nut
3. Washer
4. Spacer
5. Propeller
6. Thrust washer
1
ZMU07855
ZMU07900
4 3
2
1
5
6
1. Cotter pin
2. Propeller nut
3. Washer
4. Spacer
5. Propeller
6. Thrust washer
ZMU07843
4 3
2
1
5
6
U6DV75E0.book Page 79 Tuesday, February 21, 2017 8:33 AM
