Maintenance
42
NOTE:
The use of “Yamaha Fuel Conditioner and
Stabilizer” eliminates the need to drain the
fuel system. Consult your Yamaha dealer or
other qualified mechanic if the fuel system is
to be drained instead.
3.
Remove the top cowling and propeller.
4.
Install the flushing attachment over the
cooling water inlet.
CAUTION:
ECM00300
Do not run the engine without supplying it
with cooling water. Either the engine water
pump will be damaged or the engine will
be damaged from overheating. Before
starting the engine, be sure to supply wa-
ter to the cooling water passages.
CAUTION:
ECM00310
Avoid running the outboard motor at high
speed while on the flushing attachment,
otherwise overheating could occur.
5.
Cooling system flushing is essential to
prevent the cooling system from clogging
up with salt, sand, or dirt. In addition, fog-
ging/lubricating of the engine is mandato-
ry to prevent excessive engine damage
due to rust. Perform the flushing and fog-
ging at the same time.
WARNING
EWM00090
●
Do not touch or remove electrical parts
when starting or during operation.
●
Keep hands, hair, and clothes away from
the flywheel and other rotating parts
while the engine is running.
NOTE:
●
When using the flushing attachment, main-
tain adequate water pressure and a steady
water flow.
●
If the overheat warning device is activated,
turn the engine off, and consult your
Yamaha dealer.
6.
Run the engine at a fast idle for 10–15
minutes in neutral position while supply-
ing fresh water.
7.
Just prior to turning off the engine, quickly
spray “Yamaha Stor-Rite Engine Fogging
Oil” (Part No. LUB-STRRT-12-00) alter-
nately into the intake silencer or the fog-
ging hole of the silencer cover, if
equipped. When properly done, the en-
gine will smoke excessively and almost
stall.
8.
Remove the flushing attachment and
wipe off any excess water.
9.
Install the top cowling and propeller.
NOTE:
A flushing attachment is available from your
Yamaha dealer.
1. Flushing attachment
63P10.book Page 42 Tuesday, May 13, 2003 10:23 AM
Summary of Contents for F150C
