ELB-01 Owner’s Manual
100
Registration Memory
5
If you want to restore the original factory-programmed Registration Memory presets,
you can initialize the Electone settings. Keep in mind that this deletes any of your
custom Registration Memory and LCD Display settings. Always save your important
data to external media, such as USB flash memory.
When turning the power on after initializing the Electone, the preset settings will be
recalled and your own Registration setting(s) will be erased and replaced with the
factory defaults.
For details on how to initialize the Electone, refer to “Factory Set (Initializing the
Electone)” on page 20.
You can save your Registration Memory settings to an external storage device, such as
USB flash memory, with sixteen Registrations stored to a single file.
For details about using other external storage devices, see Chapter 6, Music Data
Recorder (M.D.R.). The instructions below explain how to save the Registration data
to a USB flash memory.
Insert the USB flash memory into the USB TO DEVICE terminal.
Press the [MDR] button.
The MDR display appears.
3
Initializing Registration Memory
4
Saving the Registration data to USB flash
memory
Reference Page
Songs (page 116)
1
Reference Page
USB TO DEVICE terminal
(page 151)
2
<SONG SELECT> ⁄
¿Ã001:USB 01 [Õ]
Summary of Contents for Electone STAGEA ELB-01
Page 1: ...Owner s Manual ELB 01 EN ...
Page 186: ...Memo ...